IEC60950,EN60950标准涉及的检测项目如下:
1.1 电源接口
1.2 标记和说明
1.3 电击和能量危险的防护
1.4 SELV电路
1.5 TNV电路
1.6 限流电路
1.7 受限制电源
1.8 接地和连接保护措施
1.9 一次电路过保护和和接地故障保护
1.10 安全联锁装置
1.11 电气绝缘
1.12 电气间隙、爬电距离和绝缘穿透距离
1.13 导体的端接
1.14 与电网电源的连接
1.15 连接外部导线的接线端子
1.16 与电网电源的断开
1.17 设备的互连
1.18 稳定性
1.19 机械强度
1.20 结构设计
1.21 危险的运动部件的防护
1.22 发热要求
1.23 外壳的开孔
1.24 防火
1.25 接触电流和保护导体电流
1.26 抗电强度
1.27 异常工作和故障条件
1.28 对通信网络的维修人员和连接到通信网络的其他设备的使用人员遭受设备危险的防护
1.29 对设备使用人员遭受来自通信网络上过电压的防护
1.30 通信配线系统的过热保护
Delta德尔塔仪器专业致力于电子电器安全安规性能及非标定制类检测设备系列的研发和制造,产品应用于各种家用电器(IEC/EN 60335系列, GB4706.1系列,UL60335系列);信息技术类设备(IEC/EN60950-1, UL60950, GB4943.1),音频/视频及类似设备(IEC/EN60065, GB8898,UL60065);灯具(IEC/EN 60598系列 GB7000.1系列,UL1598);灯的控制器(整流器)(IEC/EN 61347系列, GB 19510系列,UL8750);医用电器设备(IEC/EN 60601系列,GB 9706.1系列,UL1993)进行功率测试,电气强度测试,发热试验,绝缘电阻测试,泄漏电流测试,标签测试,冲击测试,电源线测试,扭力测试,推拉力测试,电气连接和机械固定,防电击保护测试,爬电距离和电气间隙,防火阻燃测试,放电测试,保护装置测试,稳定性测试,可接触性测试,开关测试,异常操作和故障条件测试,潮湿处理,接地电阻测试,外壳防护测试等测试项目的检测设备的提供。
IEC60950-1&GB4943.1信息技术类设备检测实验室仪器设备推荐清单:
SAR 测试
手机性能测试
EMC暗室测试
序号 | 条款号 | 检测内容 | 所需检测 仪器设备 | 精度要求和量程要求 | 所需检测仪器、设备 | |||
设备名称 | 设备型号 | 设备量程 | 设备精度 | |||||
3 | 1.6.2 | Input Current | Amp-meter | 数字功率计 | WT310 | 0—500V 0—20A 0—10kW | ±1.5% | |
4 | 2.1.1.1 | Access to energized parts | Test finger (joint /rigid 30N, fig. 2A) | See fig. 2A | 关节试验指 | GS-IP100 | fig. 2A | fig. 2A |
5 | 直型试验指 | GS-IP11 | fig. 2A | fig. 2A | ||||
6 | 推拉力计 | ANF-50 | 0—50N | ±1N | ||||
7 | Test pin (fig. 2B 4mm/3mm/15 mm long) | See fig. 2B | 试验销 | GS-IP03 | fig. 2B | fig. 2B | ||
8 | Test probe (fig. 2C 12mm/80mm) | See fig. 2C | 试验探头 | GS-IP05 | fig. 2C | fig. 2C | ||
9 | 2.1.1.5 | Energy Hazard | Variable resistive load | 电子负载 | 3250 | AC/DC 0-60V 0-20A 0-300W | ±1.5% | |
10 | 2.1.1.7 | Plug discharge | Measuring instrument with input impedance 100MΩ ±5 MΩ in parallel with an input capacitance of 25pF or less. | 示波器 | F196C | 2mV-100V/div 5ns-5s/div 100M | ±0.2% | |
11 | 高压探棒 | N2771A | 0-10kV | ±1% | ||||
12 | 2.1.1.9 | Audio Amplifiers | Suitable signal generator and audio power measuring equipment | 噪声信号发生器 | DF1681 | 20-20kHz 0-70dB | ±1dB | |
13 | 音频信号发生器 | GAG-810 | 10-1000kHz | ±1.5% | ||||
14 | 2.3.1 | Limits of TNV circuits | Resistor 5000Ω ± 2%, | ±2% | 试样电阻 | 5kΩ | 5000Ω | ±0.3% |
15 | 2.3.4 | Connection of TNV circuits to other circuits | Resistor 5000Ω ± 2%, | ±2% | 试样电阻 | 5kΩ | 5000Ω | ±0.3% |
16 | 2.3.5 | Test for operating voltages generated externally | Test generator | 120V± 2V a.c., 50 or 60 Hz, 1200Ω ± 2% | 试验电压发生器 | GS-TNV10 | 0-240V 50 or 60 Hz 1200Ω | ±1% |
17 | 2.4.2 | Limited current circuits, limit values | Resistor 2 000 Ω ± 10%, | ± 10% | 试样电阻 | 2kΩ | 2000Ω | ±0.5% |
18 | Capacitance measuring device | LCR测量仪 | 4263B | 10μH-1H 1pF-1μF 0.1Ω-100kΩ | ±0.1% | |||
19 | 2.6.3.4 | Resistance of earthing conductors | High current source with a voltage not exceeding 12 V | 接地电阻测试仪 | TOS6210 | 0—0.2Ω | ±0.002Ω | |
20 | 2.9.2 | Humidity conditioning | Chamber (91% Rh...95% Rh, 20...30 ° C) | 调温(调湿)箱 | GS-TH800 | -40—150℃ 0-95%RH | ±2℃,±2.5%RH | |
21 | 2.10 | Creepage distance/clearance/distance through insulation (determination of requirements; working voltage measurements) | Oscilloscope | 示波器 | F196C | 2mV-100V/div 5ns-5s/div 100M | ±0.2% | |
22 | Creepagedistance/clearance/distance through insulation (measurements) | Dial gauge | 爬电距离测试卡 | CC-23 | 1.0—8.0mm | 0.1mm | ||
23 | Micrometer | 游标卡尺 | 150mm | 0—150mm | 0.02mm | |||
24 | Microscope | 读数显微镜 | Vibao | 0-100mm | ±0.05mm | |||
25 | 2.10.3.9 | Measurement of transient levels | Test-generator; reference 2 of table N.1 | 脉冲发生器 | 1950S | 脉冲波形:1.2×50μs电压:0-7KV | ±5% | |
26 | 脉冲发生器 | 1950S | 脉冲波形:10×700μs电压:0-7KV | ±5% | ||||
27 | 2.10.4 | Creepage distances | Test equipment for tracking | 漏电起痕试验装置 | GS-TK20 | 0-600V 0-1A | ±1% | |
29 | 2.10.9 & 2.10.10 & 2.10.11 (and 2.10.8.2) | Thermal cycling and thermal ageing | Full draught oven (± 2ºC) Cooling facility (0º C) | ± 2ºC | 调温(调湿)箱 | GS-TH800 | -40—150℃ 0-95%RH | ±2℃,±2.5%RH |
30 | 2.10.8.4 | Abrasion resistance test | Scratch test device with steel pin | 20mm/s; 10±0.5N, 80~85° | 耐划痕试验仪 | GS-NH300 | 20mm/s;10±0.5N, 80~85° | ±2% |
31 | 顶角40度,倒圆半径0.25mm±0.02mm | 钢针 | \ | 顶角40度,倒圆半径0.25mm±0.02mm | ±1degree,±0.02mm | |||
32 | 2.10.7 | Enclosed and sealed parts | See 2.10.9 & 2.10.10 | ± 2ºC | 调温(调湿)箱SETH-Z-061LK | GS-TH800 | -40—150℃ 0-95%RH | ±2℃,±2.5%RH |
33 | 3.1.5, 3.1.9 and 4.2.2 | 10 N steady force test | Suitable tool for applying steady force of 10 N +/- 1N | ±1N | 推拉力计 | ANF-50 | 0—50N | ±1N |
35 | 3.2.6 | Cord anchorage and strain relief | Appropriate weights | 电源线拉扭试验机 | GS-DXLN20 | 0-50kg | ±1% | |
36 | 3.2.8 | Cord guards | Appropriate weights | 推拉力计 | ANF-50 | 0—50N | ±1N | |
37 | 4.1 | Stability | Inclined plane 10° | 倾斜平台 | GS-QX800 | 0-15º | ±3% | |
38 | Force 250N | 推拉力计 | ZP-1000 | 0-1000N | ±0.2% | |||
39 | Test tool 800N with a flat surface 12,5cm by 20cm | 推拉力计 | ZP-1000 | 0-1000N | ±0.2% | |||
40 | 金属平面 | 136 | 12,5cm by 20cm | ±0.5% | ||||
41 | 4.2.3 | Steady force test 30 N | Test finger (rigid 30N± 3N, fig. 2A) | 直型试验指 | GS-IP11 | fig. 2A | fig. 2A | |
42 | 推拉力计 | ANF-50 | 0—50N | ±1N | ||||
43 | 4.2.4 | Steady state force, 250 N | Test tool 250N± 10N with a circular plan surface ∅ 30mm. | 推拉力计 | ZP-1000 | 0-1000N | ±0.2% | |
44 | 金属平面 | GS16 | ∅ 30mm | ±0.1mm | ||||
45 | 4.2.5 | Impact test | ∅ 50mm/500g± 25g steel ball | 500g± 25g | 冲击钢球 | GS-IP07 | 500g ∅ 50mm | +10g,+0.004mm |
46 | 4.2.6 | Drop test | Hard wood 13mm on 19mm to 20mm plywood, two layers | 跌落平台 | GS207 | / | / | |
47 | 4.2.7 | Stress relief | Oven 70K over normal temp | 高温试验箱 | GS-GW005 | 室温—200℃ | ±1℃ | |
49 | 4.2.10 | Wall or ceiling mounted equipment | Several weights | 推拉力计 | ZP-1000 | 0-1000N | ±0.2% | |
50 | 4.3.2 | Handles and manual controls | Force 15N/20N/30N/50N | 推拉力计 | ANF-50 | 0—50N | ±1N | |
51 | 4.3.6 | Direct plug-in equipment | Test equipment (see Fig. 11 of IEC 60065) | 插头力矩测试仪 | GS-CTN04 | 0-0.25Nm | ±1% | |
53 | 4.3.13.2 | Ionizing radiation | Ionization meter (Annex H) | 电离辐射计 | 440RF/D | 0-1000μSV/h | ±20% | |
57 | 4.4 | Protection against hazardous moving parts | Test finger (joint /rigid 30N, fig. 2A) | See fig. 2A | 关节试验指 | GS-IP100 | fig. 2A | fig. 2A |
58 | 直型试验指 | GS-IP11 | fig. 2A | fig. 2A | ||||
59 | 推拉力计 | ANF-50 | 0—50N | ±1N | ||||
60 | 4.5 | Thermal requirements | ||||||
61 | Voltage supply | Single phase voltage supply systems/variability/adequacy | 变频电源 | 6902 | 0-300V 0-15A | ±1.5% | ||
62 | Three phase voltage supply systems | 变频电源 | AFR-360 | 60kVa | ±1.5% | |||
63 | Temperature (rise) | Temperature recorder (multi-channel) | 记录仪 | DR232-02-00-1R | 0—300℃ | ±0.5℃ | ||
64 | Thermocouples | 热电偶 | TT-K-30 | 0—150℃ | ±0.5℃ | |||
65 | Winding resistance (normally > 1,0 Ω 2-wire, 4-wire<1,0 Ω ). | 数字多用表 | 34401A | 0.1-100MΩ | ±3% | |||
66 | Voltage | Voltmeters (ac/dc) | 数字多用表 | 34401A | 0—1000V | ±1% | ||
67 | High voltage meter (probe) | 高压探棒 | N2771A | 0-10kV | ±1% | |||
68 | Current | Currents (ac/dc) | 数字功率计 | WT310 | 0—500V 0—20A 0—10kW | ±1.5% | ||
69 | Loading | Loads (resistive) | 电子负载 | 3250 | AC/DC 0-60V 0-20A 0-300W | ±1.5% | ||
70 | 4.5.5 | Resistance to abnormal heat | Ball pressure test apparatus according to IEC 60695-10-2 Oven at least 125ºC | 球直径:5mm;砝码:20N±0.2N | 球压试验装置 | GS-QY21 | 球直径:5mm;砝码:20N | ±0.2N |
71 | 高温试验箱 | GS-GW005 | 室温—200℃ | ±1℃ | ||||
72 | 4.6.2 | Bottoms of fire enclosure | Distillate fuel oil as described in Annex A.3.2 | 10ml 1ml/s | 灼热燃油 | GS-ZRY06 | 10ml 1ml/s | ±0.2ml ±0.1ml/s |
73 | 4.6.4.2 | Evaluation of larger openings | Suitable tool (or tools) to simulate a straight metal object, 1mm in diameter, length up to 13 mm | ∅ 1mm | 试验探针 | GS-IP14 | ∅ 1mm | +0.044mm |
74 | 4.6.5 | Adhesives for constructional purposes | Oven up to 100 ° C | 高温试验箱 | GS-GW005 | 室温—200℃ | ±1℃ | |
75 | 4.7.3 | Materials, Tests see Annex A | V-1, V-2, HF-2, 5V | IEC60695 | 针焰试验仪 | GS-NF30 | IEC60695 | IEC60695 |
76 | Bunsen burner (9,5 ± 0,5 mm) | IEC60695 | UL94水平垂直燃烧试验仪 | GS-HVUL20 | IEC60695 | IEC60695 | ||
77 | Gas for burner (~37 MJ/m3) | 甲烷气体 | 98%纯度以上 | / | / | |||
78 | Oven for preconditioning | 高温试验箱 | GS-GW005 | 室温—200℃ | ±1℃ | |||
79 | 4.7.3.6 | Materials used in high-voltage components | Test of Annex A or test of 14.4 of IEC 60065 or needle flame test according to IEC 60695-2-2 | IEC60695 | 针焰试验仪/水平垂直燃烧仪 | GS-NF30\GS-HVUL20 | IEC60695 | IEC60695 |
80 | 5.1 | Touch current and protective conductor current | Measuring instruments of Annex D | 泄漏电流测试仪 | Simpson228 | 0-10mA | ±1% | |
81 | 5.2 | Electric strength | Test equipment with the relevant voltage and tripping current | 短路电流>200mA | AC/DC耐压绝缘测试仪 | TOS9201 | AC:0-5kV, 0—110mA; DC:0-6kV, 0-10mA; 短路电流>200mA | ±1% |
83 | 6.2.1 | Protection of equipment users from overvoltages on telecommunication networks | Test probe (Fig. 2C, 12mm/80mm) | See fig. 2C | 试验探头 | GS-IP05 | fig. 2C | fig. 2C |
84 | 6.2.2.1 | Impulse Test | Impulse test generator according to Annex N | 脉冲发生器 | 1950S | 脉冲波形:10×700μs电压:0-7KV | ±5% | |
85 | 6.2.2.3 | Protection of equipment users from overvoltages on telecommunication networks | insulation resistance | 绝缘电阻测试仪 | TOS7200 | 0-1000V 0-2000MΩ | ±0.5% | |
86 | 7.4.2 | Voltage surge test | Test generator reference 3 of table N.1 | 浪涌测试仪 | SUG10/700G | 0-10kV | ±5% | |
87 | 7.4.3 | Impulse test | Test generator reference 1 of table N.1 | 脉冲发生器 | 1950S | 脉冲波形:10×700μs电压:0-7KV | ±5% |